POTS Splitter
ADSL
VDSL
SDSL
10BASE-T Ethernet
Ethernet Equipment
PoE Equipment
Surge Protector
RF Component / Module
Inductor / Transformer
EL Inverter
Rectifier
HIC (Hybrid IC)
ADSL(Asymmetric Digital Subscriber Line) is a technology for transmitting digital information at a high bandwidth on existing phone lines to homes and businesses. ADSL was specifically designed to exploit the one-way nature of most multimedia communication in which large amounts of information flow toward the user and only a small amount of interactive control information is returned toward the ISP.
A filtering device to separate high frequency signals(Data) and low frequency signals(Voice) coexisting over same pair of subscriber line located at both ends of the line, CO(Central Office) and CP(Customer Premises). The filtering should be preformed while maintaining the quality of the end-to-end.
Our solutions covers ANSI T1.413 600 ¥Ø, 900 ¥Ø of the same standard, ITU-T G.992.1(Full DMT) type 1 Zcomplex(n) for Europe, type 2 for North America, type 3 for ISDN and type 4 for Japan.
Select one of the following
ADSL POTS Splitter for Full DMT CO
ADSL POTS Splitter for full DMT RT
ADSL Micro Filter
ADSL ISDN Splitter
SDSL is the Symmetric Digital Subscriber Line which has the same maximum baud rate in both the upstream & downstream direction.
SDSL POTS Splitter is the filtering device which is required by CO as well as CP(Customer Premises) enabling SDSL system voice and data services simultaneously.
Select one of the following
SDSL POTS Splitter RT
SDSL POTS Splitter CO
VDSL is said Very High Speed Digital Subscriber Line, modulating or demodulating the data more than 10MB through existing subscriber line without one-way or both-way. The shorter the distance, the faster the data transfer rate. In addition, as a asymmetric technology, average upstream baud rate is 1.6Mbps and average downstream baud rate is 51Mbps, at the maximum baud rate of 52Mbps.
VDSL POTS Splitter is the filtering device which is required by CO as well as CP enabling VDSL system voice and data services simultaneously.
10BASE-T Ethernet is a standard specification of LAN which has 10Mbps data rate through the twisted pair cable.
ETOP POTS Splitter is the filtering device which is required by CO as well as CP enabling voice and data services simultaneously using 10BASE-T Ethernet System and PSTN through the existing subscriber line.
PoE Equipment
Surge Protector
Hybrid Power Splitter/Combiner,
Directional Coupler,
Balanced Mixer,
Low Noise Amplifier
Inductor for POTS Splitter,
ADSL Line Interface Transformer
EL Inverter for DC and AC
AC to DC Power Supply
(350W, 700W)
DC/DC Converter
Inrush Current Limiter
Customer Built