10BASE-T Ethernet  
     
   ETOP ( Ethernet On Phone Line ) 10BASE-T Ethernet POTS Splitter  
  It is a kind of Home-net Equipment enables low cost and easy installation.
 
       
  In the 10BASE-T Ethernet LAN network, HUB and NIC(Network Interface Card) is connected by 4-wire and maximum allowable length is about 150m according to our test.
Most of the building provided 4-wire between wall jacks to terminals in basement for POTS( Plain Old Telephone Service ). If HUB is installed in basement where terminals for communication to and from outside of building, 10BASE-T Ethernet service can be provided without additional wiring to the POTS subscriber so that the subscriber can access to public data network and PSTN simultaneously as the following block diagram.
 
     
 
 
 Products List
    ** Click each P/N in red color to download online catalog in pdf and thumb nail photo to enlarge.
 
 


  ETOP(Ethernet On Phone Line) POTS Splitter
ETOP POTS Splitter for CO

BHA-CU

Separating HUB and PSTN from the Subscriber Line(12 ports)
(Customer design welcomed)

 
ETOP POTS Splitter for RT (For CPE)
BHA-SU

Separating NIC and Telephone from the Subscriber Line

(Connectable 2 Phone Lines)